-- -- **************************************************************************** -- Title: Symbol Technologie's PRIVATE MIB for Spectrum24 Direct Sequence -- Ethernet Access Point Device -- -- This MIB file works with "DSAP" implementation of Access Point -- -- -- Copyright 1999 - 2002 Symbol Technologies, Inc. -- All rights reserved. -- This Symbol Technologies's SNMP Management Information Base Specification -- embodies Symbols' confidential and proprietary intellectual property. -- Symbol Technologies Inc., retains all title and ownership in the -- Specification, including any revisions. -- -- This Specification is supplied "AS IS," and Symbol makes no warranty, either -- express or implied, as to the use, operation, condition, or performance of -- the Specification. -- **************************************************************************** -- -- -- ********************************************************************* -- Symbol Direct Sequence Spread Spectrum Access Point MIB at a glance -- ********************************************************************* -- -- symbol (388) -- spectrum24(1) -- dsuap(5) -- apConfigMgmt(1) -- apManufactureInfo(1) -- apModelnumber(1) DisplayString R -- apSerialnumber(2) DisplayString R -- apHardwareRev(3) DisplayString R -- apMyMacAddr(4) PhysAddress R -- apAPFirmwareRev(5) DisplayString R -- apRFFirmwareRev(6) DisplayString R -- apMfgDate(7) DisplayString R -- apHTMLFileRev(8) DisplayString R -- -- apSystemConfig(2) -- apUnitName(1) DisplayString R/W -- apMyIPAddr(2) IpAddress R/W -- apSubnetMask(3) INTEGER R/W -- apGatewayIPAddr(4) INTEGER R/W -- apDefaultInterface(5) INTEGER R/W -- apEnetPortState(6) INTEGER R/W -- apEthernetTimeOut(7) INTEGER R/W -- apTelnetEnable(8) INTEGER R/W -- apAccCtrlEnable(9) INTEGER R/W -- apTypeFilterEnable(10) INTEGER R/W -- apWNMPEnable(13) INTEGER R/W -- apAPStateXchgEnable(14) INTEGER R/W -- apS24MobileIPEnable(15) INTEGER R/W -- apAgentAdInterval(16) INTEGER R/W -- apWebServerEnable(17) INTEGER R/W -- apMobileHomeMD5Key(18) DisplayString R/W -- apAdditionalGatewaysTable(19) -- apAdditionalGatewaysEntry(1) -- additionalGatewaysIndex(1) INTEGER R -- apAdditionalGatewaysIPAddr(2) IpAddress R/W -- apMUMUDisallowed(20) INTEGER R/W -- -- apSNMPInfo(3) -- apSNMPMode(1) INTEGER R/W -- apROCommunityName(2) DisplayString R/W -- apRWCommunityName(3) DisplayString R/W -- apTrapRcvrIpAdr(4) IpAddress R/W -- apAllTrapsEnable(5) INTEGER R/W -- apColdBootTrapEnable(6) INTEGER R/W -- apAuthenFailureTrapEnable(7) INTEGER R/W -- apRFTrapEnable(8) INTEGER R/W -- apACLTrapEnable(9) INTEGER R/W -- apMUStateChngTrapEnable(10) INTEGER R/W -- apDHCPChangeEnable(12) INTEGER R/W -- apSNMPRequests(13) Counter R -- apSNMPTraps(14) Counter R -- -- apRFConfig(4) -- apRFPortState(1) INTEGER R/W -- apNetID(2) DisplayString R/W -- apCountryName(5) DisplayString R -- apAntennaSelect(6) INTEGER R/W -- apBCMCQMax(8) INTEGER R/W -- apReassemblyTimeOut(9) INTEGER R/W -- apMaxRetries(10) INTEGER R/W -- apMulticastMask(11) OctetString R/W -- apAcceptBCESSID(14) INTEGER R/W -- apMUInactivityTimeOut(15) INTEGER R/W -- apMaxMUTrigger(24) INTEGER R/W -- apMaxRetriesVoice(25) INTEGER R/W -- apMcastMaskVoice(26) OctetString R/W -- apRFRate5-5and11Mb(28) INTEGER R/W new -- apRFRate1and2Mb(29) INTEGER R new -- -- apSerialPortConfig(5) -- apPPPState(1) INTEGER R/W -- apSerialPortUse(2) INTEGER R/W -- apModemConnected(3) INTEGER R/W -- apConnectMode(4) INTEGER R/W -- apDialOutNumber(5) OctetString R/W -- apDialOutMode(6) INTEGER R/W -- apAnswerWaitTime(7) INTEGER R/W -- apModemSpeaker(8) INTEGER R/W -- apInactivityTimeout(9) INTEGER R/W -- apPPPTimeOut(10) INTEGER R/W -- apPPPTerminates(11) Counter R/W -- -- apAddrFilterTable(6) -- apAddrFilterEntry(1) -- disallowedMUIndex(1) INTEGER Index -- disallowedMU(2) PhysAddress R/W -- -- apTypeFilteringTable(7) -- apTypeEntry(1) -- typeIndex(1) INTEGER Index -- etherType(2) INTEGER R/W -- -- -- apPerformMgmt(2) -- apTrafficMatrixTable(1) -- apTrafficMatrixEntry(1) -- apTMTableIndex(1) INTEGER Index -- apProtoItfName(2) DisplayString R -- apNPktsToEnets(3) Counter R -- apNPktsToPpps(4) Counter R -- apNPktsToRfs(5) Counter R -- apNPktsToAPStks(6) Counter R -- -- apItfStatTable(2) -- apItfStatEntry(1) -- apItfStatIndex(1) INTEGER Index -- apInterfaceName(2) DisplayString R -- apPacketsIns(3) Counter R -- apPacketsOuts(4) Counter R -- apOctetsIns(5) Counter R -- apOctetsOuts(6) Counter R -- apPktsInPerSec(7) Gauge R -- apPktsOutPerSec(8) Gauge R -- apOctInPerSec(9) Gauge R -- apOctOutPerSec(10) Gauge R -- -- apEthernetStatistics(3) -- apEPktsSeens(1) Counter R -- apEPktsForwardeds(2) Counter R -- apEPktsDiscNoMatchs(3) Counter R -- apEPktsDiscForceds(4) Counter R -- apEPktsDiscBuffers(5) Counter R -- apEPktsDiscCRCs(6) Counter R -- apEPktsSents(7) Counter R -- apEAnyCollisions(8) Counter R -- apE1orMoreColls(9) Counter R -- apEMaxCollisions(10) Counter R -- apELateCollisions(11) Counter R -- apEPktsDefers(12) Counter R -- apEBcMcPkts(13) Counter R -- apEIndividualAddrs(14) Counter R -- -- apRFStatistics(4) -- rfBcMcPktsSents(1) Counter R -- rfBcMcPktsRcvds(2) Counter R -- rfBcMcOctetsSents(3) Counter R -- rfBcMcOctetsRcvds(4) Counter R -- rfSystemPktsSents(5) Counter R -- rfSystemPktsRcvds(6) Counter R -- rfSBcMcPktsSents(7) Counter R -- rfSBcMcPktsRcvds(8) Counter R -- rfSuccFragPkts(9) Counter R -- rfUnsuccFragPkts(10) Counter R -- rfTotalFragSents(11) Counter R -- rfTotalFragRcvds(12) Counter R -- rfSuccReassPkts(13) Counter R -- rfUnsuccReassPkts(14) Counter R -- rfAssoMUs(15) Counter R -- rfRcvdCRCErrors(16) Counter R -- rfRcvdDupliPkts(17) Counter R -- rfTotalCollisions(18) Counter R -- rfPktsWithoutColls(19) Counter R -- rfPktsWithMaxColls(20) Counter R -- rfPktsWithColls(21) Counter R -- rfDataPktsSents(22) Counter R -- rfDataPktsRcvds(23) Counter R -- rfDataOctetsSents(24) Counter R -- rfDataOctetsRcvds(25) Counter R -- rfEncrypPktsSents(26) Counter R -- rfEncrypPktsRcvds(27) Counter R -- -- apSerialPortStatistics(6) -- apNbrOfDialouts(1) Counter R -- apDialoutFailures(2) Counter R -- apNbrOfAnswers(3) Counter R -- apCurrCallTime(4) TimeTicks R -- apLastCallTime(5) TimeTicks R -- -- apWNMPStatistics(7) -- apWNMPCfgPkts(1) Counter R -- WEchoRequests(2) Counter R -- WPingRequests(3) Counter R -- WPktsFromNVs(4) Counter R -- WPktsToNVs(5) Counter R -- WPassThruEcs(6) Counter R -- -- apMUInfo(8) -- apCurrentMUs(1) Counter R -- apMaxMUs(2) Counter R -- apTotalAssocs(3) Counter R -- apMUTable(4) -- apMUEntry(1) -- muIndex(1) INTEGER Index -- muMacAddr(2) PhysAddress R -- muInterface(3) INTEGER R -- muState(4) INTEGER R -- muPowerMode(5) INTEGER R -- muStationID(6) INTEGER R -- muLastAPAddr(7) PhysAddress R -- muTotalAssoc(8) INTEGER R -- muAssocStart(9) TimeTicks R -- muLstAssStrt(10) TimeTicks R -- muLastAssEnd(11) TimeTicks R -- muNPktsSents(12) Counter R -- muNPktsRcvds(13) Counter R -- muNBytesSents(14) Counter R -- muNByteRcvds(15) Counter R -- muNDiscdPkts(16) Counter R -- muTmLastData(17) TimeTicks R -- muPriority(18) INTEGER R -- muSupportedRates(19) INTEGER R -- muCurrentXmtRate(20) INTEGER R -- muLastActivity(21) TimeTicks R -- muEncryption(22) INTEGER R -- apMUHmAgTable(5) -- apMUHATEntry(1) -- muHATMUIpAddr(1) IpAddress R -- muHATFrAgIpAddr(2) IpAddress R -- apMUFrAgTable(6) -- apMUFATEntry(1) -- muFATMUIpAddr(1) IpAddress R -- muFATHmAgIpAddr(2) IpAddress R -- -- apKnownAPsTable(9) -- apKnownAPsEntry(1) -- apAPMacAddr(1) PhysAddress R -- apAPIpAddr(2) IpAddress R -- apHoppingSet(3) INTEGER R -- apHoppingSeq(4) INTEGER R -- apNbrOfMUs(5) INTEGER R -- apKBIOS(6) INTEGER R -- apAway(7) INTEGER R -- ap802dot11Protocol(8) INTEGER R -- apFwVer(9) DisplayString R -- apDSchannel(10) INTEGER R new -- -- apFilterStatistics(10) -- apAdrViolations(1) Counter R -- apTypeViolations(2) Counter R -- -- apRetryHistogramTable(12) -- apRetryHistogramEntry(1) -- apRetryHistogramIndex(1) INTEGER R -- apNumberOfRetries(2) INTEGER R -- apPacketsHistogramCounts(3) Counter R -- -- apDSPerFreqStatTable(13) -- apDSPerFreqStatEntry(1) -- rfDSFrequency(1) INTEGER R new -- rfDSPerFqPktsSents(2) Counter R new -- rfDSPerFqPktsRcvds(3) Counter R new -- rfDSPerFqRetries(4) Counter R new -- -- apMobileIPStatistics(14) -- apAgentAdSent(1) -- apRegRequestRcvd(2) -- apRegReplySent(3) -- -- apFaultManagement(3) -- apClrAllStatistics(1) INTEGER R/W -- apClrMUTable(2) INTEGER R/W -- apClrACL(3) INTEGER R/W -- apClrACLRangeTable(4) INTEGER R/W -- apClrAddrFilterTbl(5) INTEGER R/W -- apLdACLFrMUList(6) INTEGER R/W -- apModemDialOut(7) INTEGER R/W -- apModemHangUp(8) INTEGER R/W -- apUpdateFirmware(9) INTEGER R/W -- apDnLdFileName(10) DisplayString R/W -- apTFTPServer(11) IpAddress R/W -- apResetAP(12) INTEGER R/W -- apHTMLFileName(13) DisplayString R/W -- apUpdateHTMLFile(14) INTEGER R/W -- apDHCPEnable(15) INTEGER R/W -- apUpdAllAPsFirmware(16) INTEGER R/W -- apUpdAllAPsHTMLFile(17) INTEGER R/W -- apTFTPUpdBothFiles(18) INTEGER R/W -- apHelpURL(19) DisplayString R/W -- apFileUpdateStatus(20) INTEGER R -- -- -- apSecurityMgmt(4) -- apACLViolations(1) Counter R -- apSaveConfig(2) INTEGER R/W -- apAccCtrlTable(3) -- apACLEntry(1) -- allowedMUIdx(1) INTEGER R -- allowedMU(2) PhysAddress R/W -- apACLRangeTable(4) -- apACLRTEntry(1) -- apACLRangeIdx(1) INTEGER R -- minMacAddr(2) PhysAddress R/W -- maxMacAddr(3) PhysAddress R/W -- apSaveConfigAllAPs(5) INTEGER R/W -- SYMBOL-ENTERPRISE-PRIVATE-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 snmp, DisplayString, PhysAddress FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; symbol OBJECT IDENTIFIER ::= { enterprises 388 } spectrum24 OBJECT IDENTIFIER ::= { symbol 1 } dsuap OBJECT IDENTIFIER ::= { spectrum24 5 } apConfigMgmt OBJECT IDENTIFIER ::= { dsuap 1 } apPerformMgmt OBJECT IDENTIFIER ::= { dsuap 2 } apFaultMgmt OBJECT IDENTIFIER ::= { dsuap 3 } apSecurityMgmt OBJECT IDENTIFIER ::= { dsuap 4 } apManufactureInfo OBJECT IDENTIFIER ::= { apConfigMgmt 1 } apSystemConfig OBJECT IDENTIFIER ::= { apConfigMgmt 2 } apSNMPInfo OBJECT IDENTIFIER ::= { apConfigMgmt 3 } apRFConfig OBJECT IDENTIFIER ::= { apConfigMgmt 4 } apSerialPortConfig OBJECT IDENTIFIER ::= { apConfigMgmt 5 } -- apAddrFilterTable OBJECT IDENTIFIER ::= { apConfigMgmt 6 } -- apTypeFilteringTable OBJECT IDENTIFIER ::= { apConfigMgmt 7 } -- apTrafficMatrixTable OBJECT IDENTIFIER ::= { apPerformMgmt 1 } -- apItfStatTable OBJECT IDENTIFIER ::= { apPerformMgmt 2 } apEthernetStatistics OBJECT IDENTIFIER ::= { apPerformMgmt 3 } apRFStatistics OBJECT IDENTIFIER ::= { apPerformMgmt 4 } apSerialPortStatistics OBJECT IDENTIFIER ::= { apPerformMgmt 6 } apWNMPStatistics OBJECT IDENTIFIER ::= { apPerformMgmt 7 } apMUInfo OBJECT IDENTIFIER ::= { apPerformMgmt 8 } -- apKnownAPsTable OBJECT IDENTIFIER ::= { apPerformMgmt 9 } apFilterStatistics OBJECT IDENTIFIER ::= { apPerformMgmt 10} apMobileIPStatistics OBJECT IDENTIFIER ::= { apPerformMgmt 14} -- apClrAllStatistics OBJECT IDENTIFIER ::= { apFaultMgmt 1 } -- apClrMUTable OBJECT IDENTIFIER ::= { apFaultMgmt 2 } -- apClrACL OBJECT IDENTIFIER ::= { apFaultMgmt 3 } -- apClrACLRangeTable OBJECT IDENTIFIER ::= { apFaultMgmt 4 } -- apClrAddrFilterTbl OBJECT IDENTIFIER ::= { apFaultMgmt 5 } -- apLdACLFrMUList OBJECT IDENTIFIER ::= { apFaultMgmt 6 } -- apModemDialOut OBJECT IDENTIFIER ::= { apFaultMgmt 7 } -- apModemHangUp OBJECT IDENTIFIER ::= { apFaultMgmt 8 } -- apUpdateFirmware OBJECT IDENTIFIER ::= { apFaultMgmt 9 } -- apDnLdFileName OBJECT IDENTIFIER ::= { apFaultMgmt 10 } -- apTFTPServer OBJECT IDENTIFIER ::= { apFaultMgmt 11 } -- apResetAP OBJECT IDENTIFIER ::= { apFaultMgmt 12 } -- -- apACLViolation OBJECT IDENTIFIER ::= { apSecurityMgmt 1} -- apSaveConfig OBJECT IDENTIFIER ::= { apSecurityMgmt 2} -- apAccCtrlTable OBJECT IDENTIFIER ::= { apSecurityMgmt 3} -- apACLRangeTable OBJECT IDENTIFIER ::= { apSecurityMgmt 4} coldStart TRAP-TYPE ENTERPRISE snmp VARIABLES { apMyMacAddr } DESCRIPTION "Access Point cold boot. - apMyMacAddr is the MAC address of the Access Point sending this trap message." ::= 0 authenticationFailure TRAP-TYPE ENTERPRISE snmp VARIABLES { apMyMacAddr, apAPMacAddr } DESCRIPTION "Invalid SNMP Community string. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - apAPMacAddr is the MAC address of the remote host sending SNMP packet with invalid community." ::= 4 apDSUAPRFStartUpTrap TRAP-TYPE ENTERPRISE dsuap VARIABLES { apMyMacAddr } DESCRIPTION "RF Driver is up. - apMyMacAddr is the MAC address of the Access Point sending this trap message." ::= 101 apDSUAPACLViolationTrap TRAP-TYPE ENTERPRISE dsuap VARIABLES { apMyMacAddr, muMacAddr } DESCRIPTION "Mobile Unit MAC address not in the Access control Table. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - muMacAddr is the MAC address of the Mobile Unit not in the Access Control Table." ::= 102 apDSUAPMUAssocTrap TRAP-TYPE ENTERPRISE dsuap VARIABLES { apMyMacAddr, muMacAddr, apCurrentMUs } DESCRIPTION "Indicates that there is one Mobile Unit associating with this Access Point. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - muMacAddr is the MAC address of the Mobile Unit. Note : If two or more Mobile Units associate with the Access Point at the same time, muMacAddr belongs to the last Mobile Unit. - apCurrentMUs is the number of Mobile Units currently associating with this Access Point." ::= 111 apDSUAPMUUnAssocTrap TRAP-TYPE ENTERPRISE dsuap VARIABLES { apMyMacAddr, muMacAddr, apCurrentMUs } DESCRIPTION "Indicates that there is one Mobile Unit no longer associating with this Access Point anymore. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - muMacAddr is the MAC address of the Mobile Unit. Note : If two or more Mobile Units un-associate with the Access Point at the same time, muMacAddr belongs to the last Mobile Unit. - apCurrentMUs is the number of Mobile Units currently associating with this Access Point." ::= 112 apDSUAPMUMaxAssocTrap TRAP-TYPE ENTERPRISE dsuap VARIABLES { apMyMacAddr, apCurrentMUs } DESCRIPTION "Indicates that the number of MUs associated with this Access Point is at the threshold set by apMaxMUTrigger. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - apCurrentMUs is the number of Mobile Units currently associating with this Access Point." ::= 116 apDSUAPDHCPConfigChgTrap TRAP-TYPE ENTERPRISE dsuap VARIABLES { apMyMacAddr } DESCRIPTION "If there are any DHCP network configuration change, This trap will be issued. - apMyMacAddr is the MAC address of the Access Point sending this trap message. " ::= 130 apDSUAPDHCPLeaseUpTrap TRAP-TYPE ENTERPRISE dsuap VARIABLES { apMyMacAddr } DESCRIPTION "If the Access point(Client) is unable to renew the DHCP lease before the lease is expired, this trap is generated. - apMyMacAddr is the MAC address of the Access Point sending this trap message. " ::= 131 -- -- Access Point Configuration Management (1) -- -- Access Point Manufacturer Information Group (1.1) -- -- This group specifies the manufacturer information on the Access -- Point for identification only. These data may not be altered by -- users. -- apModelnumber OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The Model Number of the Access Point device." ::= { apManufactureInfo 1 } apSerialnumber OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The Serial Number of the Access Point system." ::= { apManufactureInfo 2 } apHardwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE (1..8)) ACCESS read-only STATUS mandatory DESCRIPTION "The current revision of the Access Point hardware." ::= { apManufactureInfo 3 } apMyMacAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the Access Point." ::= { apManufactureInfo 4 } apAPFirmwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The current revision of the Access Point firmware." ::= { apManufactureInfo 5 } apRFFirmwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The current revision of the Access Point radio firmware." ::= { apManufactureInfo 6 } apMfgDate OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) ACCESS read-only STATUS mandatory DESCRIPTION "The Date this Access Point was manufactured." ::= { apManufactureInfo 7 } apHTMLFileRev OBJECT-TYPE SYNTAX DisplayString (SIZE (1..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The current revision of the Access Point HTML file." ::= { apManufactureInfo 8 } -- -- Access Point System Configuration Information Group (1.2) -- -- This group contains the Access Point System Configuration Information -- which is used for controlling the Access Point system operations. -- apUnitName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) ACCESS read-write STATUS mandatory DESCRIPTION "An ASCII string to identify this Access Point (up to 31 characters)." ::= { apSystemConfig 1 } apMyIPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address for the AP." ::= { apSystemConfig 2 } apSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP subnet mask for the AP." ::= { apSystemConfig 3 } apGatewayIPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address for the default gateway." ::= { apSystemConfig 4 } apDefaultInterface OBJECT-TYPE SYNTAX INTEGER { ppp(1), ethernet(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the default interface (Ethernet or PPP) for the AP to forward an unknown packet. Default is ethernet(2)." ::= { apSystemConfig 5 } apEnetPortState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the state of the Ethernet interface. Default is up(1)." ::= { apSystemConfig 6 } apEthernetTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Ethernet time out value ranges from 30 to 255 seconds. If the value is: - 0: the Ethernet Time Out function is disabled. - 1: detect Ethernet timeout by hardware circuitry. - 2: Not Supported - 3: Not Supported The default value is 0." ::= { apSystemConfig 7 } apTelnetEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables Telnet access to the AP. Default is enabled(1)." ::= { apSystemConfig 8 } apAccCtrlEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables the Access Control function. When it is enabled, a Mobile Unit can associate with the Access Point only if its MAC address is in the Access Control Table. Default is disabled(2)." ::= { apSystemConfig 9 } apTypeFilterEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), forward(2), discard(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the type of Access Point Type Filtering operation, i.e. Disabled/Forward/Discard. Default is disabled(1)." ::= { apSystemConfig 10 } apWNMPEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables Use of the WNMP agent. Default is enabled(1)." ::= { apSystemConfig 13 } apAPStateXchgEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables exchanging Access Point to Access Point state information by using WNMP protocol. Default is enabled(1)." ::= { apSystemConfig 14 } apS24MobileIPEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables Spectrum24 Mobile IP support, i.e. AP will act as Mobility Agent. Default is disabled(2)." ::= { apSystemConfig 15 } apAgentAdInterval OBJECT-TYPE SYNTAX INTEGER (0..1200) ACCESS read-write STATUS mandatory DESCRIPTION "Interval in second at which Mobility Agent Advertise- ments are sent by the Third Party Mobility Agent(s). AP will cache the Third Party Advertisement and pass it to MU at association time. If AP does not receive the Advertisement within the interval seconds, the cached Advertisement will be deleted. If the interval is 0 or apS24MobileIPEnable is enabled, caching of the Advertisement will not occur. Range (0..1200) 3*Seconds . Default is 0." ::= { apSystemConfig 16 } apWebServerEnable OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables Access Point Web Server. When enabled, the Access Point will serve Web clients. Default is enabled(1)" ::= { apSystemConfig 17 } apMobileHomeMD5Key OBJECT-TYPE SYNTAX DisplayString (SIZE (1..13)) ACCESS read-write STATUS mandatory DESCRIPTION "The MD5 key is a secret key shared between home agent and the mobile unit. This is used to generate a MD5 checksum, which is used for packet authentication. Length of this variable should not exceed 13 characters." ::= { apSystemConfig 18 } apAdditionalGatewaysTable OBJECT-TYPE SYNTAX SEQUENCE OF ApAdditionalGatewaysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of information for additional Gateways. The current number of entries is 7." ::= { apSystemConfig 19 } apAdditionalGatewaysEntry OBJECT-TYPE SYNTAX ApAdditionalGatewaysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of information for additional gateways for this access point. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { additionalGatewaysIndex } ::= { apAdditionalGatewaysTable 1} ApAdditionalGatewaysEntry ::= SEQUENCE { additionalGatewaysIndex INTEGER, apAdditionalGatewaysIPAddr IpAddress } additionalGatewaysIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Specific Gateway information Table index. Range (1..8)." ::= { apAdditionalGatewaysEntry 1 } apAdditionalGatewaysIPAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Gateway used for this AP." ::= { apAdditionalGatewaysEntry 2 } apMUMUDisallowed OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls inter-MU communication. When enabled(on), it will disallow one MU to talk to another MU through RF only." ::= { apSystemConfig 20 } -- -- The Access Point SNMP Configuration Information Group (1.3) -- -- This group contains the SNMP configuration information which is -- used for SNMP operations on the AP. A trap receiver table -- allows users to set the Network Manager addresses for receiving -- the traps (i.e. Alert/Alarm/Event) from Access Point devices. -- apSNMPMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), readonly(2), readwrite(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the mode of the SNMP Agent operation, i.e. Disabled/Readonly/ReadWrite. Default is readwrite(3)." ::= { apSNMPInfo 1 } apROCommunityName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..31)) ACCESS read-write STATUS mandatory DESCRIPTION "The Read-Only community name of the SNMP command for management station accessing this Access Point (up to 31 characters)." ::= { apSNMPInfo 2 } apRWCommunityName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..13)) ACCESS read-write STATUS mandatory DESCRIPTION "The Read-Write community name of the SNMP command for management station accessing this Access Point (up to 13 characters). This community name is same as the System Password or Telnet Password. For security purpose, if the management station uses the READ-ONLY community name to access this object, a string of 'xxxxx' will be returned." ::= { apSNMPInfo 3 } apTrapRcvrIpAdr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "Trap receiver's (i.e. Network Manager's) IP address." ::= { apSNMPInfo 4 } apAllTrapsEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables all SNMP traps. Default is disabled (2)." ::= { apSNMPInfo 5 } apColdBootTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables Access Point Cold Boot trap. Default is disabled(2). This is a generic-trap and the trap code is 0. The enabled/disabled state of this trap depends on the state of apAllTrapsEnable." ::= { apSNMPInfo 6 } apAuthenFailureTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables authentication failure trap. Default is disabled(2). This is a generic-trap and the trap code is 4. The enabled/disabled state of this trap depends on the state of apAllTrapsEnable." ::= { apSNMPInfo 7 } apRFTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables Access Point RF driver startup trap. Default is disabled(2). This is an enterprise-specific trap and the trap code is 101. The enabled/disabled state of this trap depends on the state of apAllTrapsEnable." ::= { apSNMPInfo 8 } apACLTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables Access Control violation trap. Default is disabled(2). This is an enterprise-specific trap and the trap code is 102. The enabled/disabled state of this trap depends on the state of apAllTrapsEnable." ::= { apSNMPInfo 9 } apMUStateChngTrapEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables Mobile Unit State Change trap. Default is disabled(2). Once enabled, the following four (4) enterprise-specific traps will be generated : - MU Association Trap, the trap code is 111. - MU Un-association Trap, the trap code is 112. - MU To CAM Trap, the trap code is 113. - MU To PSP Trap, the trap code is 114. The enabled/disabled state of this trap depends on the state of apAllTrapsEnable." ::= { apSNMPInfo 10 } apDHCPChangeEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When Enabled, if there are any DHCP network configuration change, a trap will be issued. Default is disabled(2). " ::= { apSNMPInfo 12 } apSNMPRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of SNMP requests to this SNMP Agent." ::= { apSNMPInfo 13 } apSNMPTraps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Traps that were generated by this SNMP Agent." ::= { apSNMPInfo 14 } -- -- The Access Point RF Configuration Information Group (1.4) -- -- This group contains AP Radio Frequency interface configuration -- information. -- apRFPortState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the state of the RF Interface. Default is up(1)." ::= { apRFConfig 1 } apNetID OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The current RF Network ID for the AP. The Network name can have up to 32 alphanumerical characters." ::= { apRFConfig 2 } apCountryName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The country for which the Access Point radio is configured. It is set at the factory and may not be altered." ::= { apRFConfig 5 } apAntennaSelect OBJECT-TYPE SYNTAX INTEGER { primary-only(1), diversity-On(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Select either Primary antenna only (i.e. Disable antenna diversity) or both Primary and Secondary antennas (i.e. Enable antenna diversity). Default is diversity-On(2)." ::= { apRFConfig 6 } apBCMCQMax OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum size of broadcast/multicast queue. Range (0..32). Default is 10." ::= { apRFConfig 8 } apReassemblyTimeOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Sets the time in 0.5 ms units before a timeout occurs during a packet re-assembly. Packet re-assemblies occur when a large Ethernet packet is fragmented into smaller wireless network packets. Default is 9000." ::= { apRFConfig 9 } apMaxRetries OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of allowed retries before aborting a single transmission. Range (0..32). Default is 15." ::= { apRFConfig 10 } apMulticastMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..4)) ACCESS read-write STATUS mandatory DESCRIPTION "Supports broadcast download protocol for Point-of-Sale terminals that load a new operating image over the network instead of using a local non-volatile drive. The multicast mask is the top 32 bits of the MAC address and allows for a series of MAC addresses to receive multicast messages. These messages are transmitted by the AP immediately and not queued for processing at DTIM intervals." ::= { apRFConfig 11 } apAcceptBCESSID OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables the function to accept Broadcast ESS ID. Enabling this feature is NOT recommended. See manual for details. Default is disabled(2)." ::= { apRFConfig 14 } apMUInactivityTimeOut OBJECT-TYPE SYNTAX INTEGER (3..600) ACCESS read-write STATUS mandatory DESCRIPTION "Allowable Mobile Unit inactivity time in minutes. The time out limit is from 3 to 600 minutes. Default is 60 minutes." ::= { apRFConfig 15 } apMaxMUTrigger OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the trigger point for sending apMUMaxAssocTrap trap. Range (1..127). The default value is 127." ::= { apRFConfig 24 } apMaxRetriesVoice OBJECT-TYPE SYNTAX INTEGER (0..32) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of allowed retries before aborting a single transmission. Range (0..32). Default is 5." ::= { apRFConfig 25 } apMcastMaskVoice OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This is used for Spectrum 24 telephone for intercomm function. The multicast mask is the top 32 bits of the MAC address and allows for a series of MAC addresses to receive multicast messages. These messages are transmitted by the AP immediately and not queued for processing at DTIM intervals.." ::= { apRFConfig 26 } apRFRate5-5and11Mb OBJECT-TYPE SYNTAX INTEGER{ required(1), optional(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the Current state of these RF data rates. There are two options: - required(1) - optional(2) Default is optional for 5.5 and 11 Mb/S data rate." ::= { apRFConfig 28 } apRFRate1and2Mb OBJECT-TYPE SYNTAX INTEGER{ required(1), optional(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the Current state of these RF data rates. This parameter is not configurable." ::= { apRFConfig 29 } -- -- AP Serial Port Configuration Information Group (1.5) -- This group contains the Serial Port configuration information. -- apPPPState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the current state of the PPP connection machine. Default is down(2)." ::= { apSerialPortConfig 1 } apSerialPortUse OBJECT-TYPE SYNTAX INTEGER { ppp(1), ui(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether the Serial Interface is to be used as User Interface(UI) or PPP. Default is ui(2)." ::= { apSerialPortConfig 2 } apModemConnected OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether the Serial Interface has a modem attached to it. Default is no(2)." ::= { apSerialPortConfig 3 } apConnectMode OBJECT-TYPE SYNTAX INTEGER { originate(1), answer(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the Modem connection mode: - originate(1): AP sends dial-out information. - answer(2): AP waits for dial-in information. Default is answer(2)." ::= { apSerialPortConfig 4 } apDialOutNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the number to be dialed by the modem." ::= { apSerialPortConfig 5 } apDialOutMode OBJECT-TYPE SYNTAX INTEGER { auto(1), manual(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the dialout mode: - auto(1): Modem dial out during startup time. - manual(2): Modem dial out by manned intervention Default is auto(1)." ::= { apSerialPortConfig 6 } apAnswerWaitTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the period (in seconds) the AP will wait for the remote unit to answer the call. Default is 60 seconds." ::= { apSerialPortConfig 7 } apModemSpeaker OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies if modem speaker is turned on(1) or off(2). Default is on(1)." ::= { apSerialPortConfig 8 } apInactivityTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the User Interface inactivity timeout in minutes. 0 means no timeout. Default is 5 minutes." ::= { apSerialPortConfig 9 } apPPPTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the PPP event timeout in seconds. Default is 3 seconds." ::= { apSerialPortConfig 10 } apPPPTerminates OBJECT-TYPE SYNTAX Counter ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the maximum number of PPP terminate requests. Default is 10." ::= { apSerialPortConfig 11 } -- -- Access Point Address Filtering Table (1.6) -- This group defines the MU MAC address list which is not allowed to -- get access to the AP. apAddrFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ApAddrFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of MAC addresses not allowed to associate with the Access Point. The maximum number of entries in the table is 512." ::= { apConfigMgmt 6 } apAddrFilterEntry OBJECT-TYPE SYNTAX ApAddrFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of Address Filter. A row in this table is created by setting the value of disallowedMU to the MAC address of the MU not allowed to associate with the Access Point. A row in this table is deleted by setting the value of disallowedMU to '000000000000'." INDEX { disallowedIndex } ::= { apAddrFilterTable 1 } ApAddrFilterEntry ::= SEQUENCE { disallowedIndex INTEGER, disallowedMU PhysAddress } disallowedIndex OBJECT-TYPE SYNTAX INTEGER (1..512) ACCESS read-only STATUS mandatory DESCRIPTION "Address Filter Table index. Range (1..512)." ::= { apAddrFilterEntry 1 } disallowedMU OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "MU MAC address which is not allowed to be associated with this Access Point." ::= { apAddrFilterEntry 2 } -- -- Access Point Type Filter Table (1.7) -- This group defines the AP filter type list which is limited to -- 1. A packet level filter function only, no filter rules are applied. -- 2. Only inbound filter is supported; no "outbound" or "inbound & -- outbound" direction are supported. -- 3. No TCP/UDP source port is selected for filter criteria. -- apTypeFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF ApTypeFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Ethernet types (i.e. 16-bit DIX Ethernet type), which are entered by the user and supported for the type filtering function. The maximum number of entries in the table is 16." ::= { apConfigMgmt 7 } apTypeFilterEntry OBJECT-TYPE SYNTAX ApTypeFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of Type Filter. A row in this table is created by setting the value of etherType to Ethernet packet type in hexadecimal. A row in this table is deleted by setting the value of etherType to 00" INDEX { typeIndex } ::= { apTypeFilterTable 1 } ApTypeFilterEntry ::= SEQUENCE { typeIndex INTEGER, etherType OCTET STRING } typeIndex OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS mandatory DESCRIPTION "Filter Type Table index. Range (1..16)." ::= { apTypeFilterEntry 1 } etherType OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..2)) ACCESS read-write STATUS mandatory DESCRIPTION "A 16-bit Ethernet Protocol Type in hexadecimal." ::= { apTypeFilterEntry 2 } -- -- Access Point Performance Management (2) -- -- Access Point Traffic Matrix Table Group (2.1) -- -- This group counts the number of packets from all protocol interfaces -- to a certain port interface (i.e. Ethernet, PPP, RF, AP Stack). -- apTrafficMatrixTable OBJECT-TYPE SYNTAX SEQUENCE OF ApTrafficMatrixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Access Point Traffic Matrix which provides information on packets transmitted from one interface to another (Ethernet, PPP, radio, AP). The table also displays the number of broadcast packets transmitted from the Access Point. The current number of entries is 5." ::= { apPerformMgmt 1 } apTrafficMatrixEntry OBJECT-TYPE SYNTAX ApTrafficMatrixEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of Access Point Traffic Matrix. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { apTMTableIndex } ::= { apTrafficMatrixTable 1} ApTrafficMatrixEntry ::= SEQUENCE { apTMTableIndex INTEGER, apProtoItfName DisplayString, apNPktsToEnets Counter, apNPktsToPpps Counter, apNPktsToRfs Counter, apNPktsToAPStks Counter } apTMTableIndex OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-only STATUS mandatory DESCRIPTION "Access Point Traffic Matrix Table index. Range (1..5)." ::= { apTrafficMatrixEntry 1 } apProtoItfName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) ACCESS read-only STATUS mandatory DESCRIPTION "Access Point Protocol Interface Name (i.e. Ethernet, PPP, Radio, AP)." ::= { apTrafficMatrixEntry 2 } apNPktsToEnets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets sent from the Access Point Protocol Interface to the Ethernet Interface. This field should always be zero if the Access Point Protocol Interface is Ethernet." ::= { apTrafficMatrixEntry 3 } apNPktsToPpps OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets sent from the Access Point Protocol Interface to the PPP Interface. This field is meaningful only if the PPP interface is enabled. " ::= { apTrafficMatrixEntry 4 } apNPktsToRfs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets sent from the Access Point Protocol Interface to the RF Interface. If the Access Point Protocol Interface is RF, these are frames from one MU to another." ::= { apTrafficMatrixEntry 5 } apNPktsToAPStks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets sent from the Access Point Protocol Interface to the internal Access Point stack. This field should always be zero if the Access Point Protocol Interface is Access Point Stack." ::= { apTrafficMatrixEntry 6 } -- -- Access Point Basic Interface Statistics/Counters Group (2.2) -- -- This group contains the statistics/counters common to the four -- interfaces on the Access Point (i.e. Ethernet, PPP, RF, AP Stack.) -- apItfStatTable OBJECT-TYPE SYNTAX SEQUENCE OF ApItfStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Access Point Interfaces Statistics, which provides packets forwarding statistics for each inter- face (Ethernet, PPP, RF, AP stack). Interface statistics also provide performance informa- tion for each interface in Packets-per-second (PPS) and Bytes- per-second (BPS). The AP interface indicates packets sent to the AP stack (e.g. configuration requests, SNMP, Telnet etc.). The current number of entries is 4." ::= { apPerformMgmt 2 } apItfStatEntry OBJECT-TYPE SYNTAX ApItfStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of Access Point Interface Statistics. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { apItfStatIndex } ::= { apItfStatTable 1 } ApItfStatEntry ::= SEQUENCE { apItfStatIndex INTEGER, apInterfaceName DisplayString, apPacketsIns Counter, apPacketsOuts Counter, apOctetsIns Counter, apOctetsOuts Counter, apPktsInPerSec Gauge, apPktsOutPerSec Gauge, apOctInPerSec Gauge, apOctOutPerSec Gauge } apItfStatIndex OBJECT-TYPE SYNTAX INTEGER (1..4) ACCESS read-only STATUS mandatory DESCRIPTION "Access Point Interface Statistics Table index. Range (1..4)." ::= { apItfStatEntry 1 } apInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) ACCESS read-only STATUS mandatory DESCRIPTION "Access Point Interface Name (Ethernet, PPP, RF, AP)." ::= { apItfStatEntry 2 } apPacketsIns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of good packets received on the specified interface." ::= { apItfStatEntry 3 } apPacketsOuts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets successfully transmitted on the specified interface." ::= { apItfStatEntry 4 } apOctetsIns OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of good bytes received on the specified interface." ::= { apItfStatEntry 5 } apOctetsOuts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of bytes successfully transmitted on the specified interface." ::= { apItfStatEntry 6 } apPktsInPerSec OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of good packets per second received on the specified Interface." ::= { apItfStatEntry 7 } apPktsOutPerSec OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets per second successfully transmitted on the specified interface." ::= { apItfStatEntry 8 } apOctInPerSec OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of good bytes per second received on the specified Interface." ::= { apItfStatEntry 9 } apOctOutPerSec OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of bytes per second successfully transmitted on the specified interface." ::= { apItfStatEntry 10 } -- -- Access Point Ethernet Port Interface Statistics Group (2.3) -- -- This group contains statistics/counters information specific to -- the Access Point Ethernet Interface. -- apEPktsSeens OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that have been seen on the Ethernet interface. Most of these packets are for stations other than those associated with this AP." ::= { apEthernetStatistics 1 } apEPktsForwardeds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Ethernet packets forwarded from the Ethernet interface to other interfaces." ::= { apEthernetStatistics 2 } apEPktsDiscNoMatchs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets discarded due to unknown destination (i.e. no database entry)." ::= { apEthernetStatistics 3 } apEPktsDiscForceds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets discarded due to Type or Address filters applied." ::= { apEthernetStatistics 4 } apEPktsDiscBuffers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets discarded due to lack of available buffers in AP." ::= { apEthernetStatistics 5 } apEPktsDiscCRCs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets discarded due to CRC errors." ::= { apEthernetStatistics 6 } apEPktsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets sent by this Ethernet Port." ::= { apEthernetStatistics 7 } apEAnyCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that suffer at least one collision." ::= { apEthernetStatistics 8 } apE1orMoreColls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that suffer more than one collision." ::= { apEthernetStatistics 9 } apEMaxCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that suffer more than the maximum number of collisions." ::= { apEthernetStatistics 10 } apELateCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that suffer late collisions." ::= { apEthernetStatistics 11 } apEPktsDefers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the times AP had to defer transmit requests on Ethernet due to busy medium." ::= { apEthernetStatistics 12 } apEBcMcPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of broadcast/multicast packets that have been transmitted." ::= { apEthernetStatistics 13 } apEIndividualAddrs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of individual address (unicast) packets that have been received." ::= { apEthernetStatistics 14 } -- -- Radio Frequency Interface Statistics Group (2.4) -- -- This group contains statistics/counters information specific to -- the Access Point Radio Frequency Interface. -- rfBcMcPktsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of broadcast/multicast packets that have been successfully transmitted." ::= { apRFStatistics 1 } rfBcMcPktsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of broadcast/multicast packets that have been successfully received." ::= { apRFStatistics 2 } rfBcMcOctSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of broadcast/multicast bytes that have been successfully transmitted." ::= { apRFStatistics 3 } rfBcMcOctRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of broadcast/multicast bytes that have been successfully received." ::= { apRFStatistics 4 } rfSysPktsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of system packets (includes probe operations packets) that have been successfully transmitted." ::= { apRFStatistics 5 } rfSysPktsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of system packets (includes probes /associate packets) that have been successfully received." ::= { apRFStatistics 6 } rfSBcMcPktsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of system broadcast/multicast packets (includes beacons) that have been successfully transmitted." ::= { apRFStatistics 7 } rfSBcMcPktsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of system broadcast/multicast (includes beacons) packets that have been successfully received." ::= { apRFStatistics 8 } rfSuccFragPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that were fragmented and for which all fragments were acked." ::= { apRFStatistics 9 } rfUnsuccFragPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that were fragmented but for which one or more fragments were not acked." ::= {apRFStatistics 10 } rfTotalFragSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets fragments that have been sent." ::= { apRFStatistics 11 } rfTotalFragRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets fragments that have been received." ::= { apRFStatistics 12 } rfSuccReassPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that were reassigned and successfully reassembled." ::= { apRFStatistics 13 } rfUnsuccReassPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that were unsuccessfully reassembled." ::= { apRFStatistics 14 } rfAssocMUs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of MUs currently associated with this AP." ::= { apRFStatistics 15 } rfRcvdCRCErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that were received but had the CRC errors." ::= { apRFStatistics 16 } rfRcvdDupPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that were received but were duplicates of previously received. This is usually an indication that an ACK was not received by the sending unit." ::= { apRFStatistics 17 } rfTotalCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of collisions that have occured on the interface. A collision on the RF interface means that an ack was not received or that a RTS was not answered by a CTS." ::= { apRFStatistics 18 } rfPktsWithoutColls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets without any collision." ::= { apRFStatistics 19 } rfPktsWithMaxColls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that suffered the maximum number of collisions." ::= { apRFStatistics 20 } rfPktsWithColls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that suffered at least one collision." ::= { apRFStatistics 21 } rfDataPktsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets transmitted." ::= { apRFStatistics 22 } rfDataPktsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets that were successfully received." ::= { apRFStatistics 23 } rfDataOctetsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of octets transmitted." ::= { apRFStatistics 24 } rfDataOctetsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of octets that were successfully received." ::= { apRFStatistics 25 } rfEncrypPktsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Encrypted packets transmitted." ::= { apRFStatistics 26 } rfEncrypPktsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Encrypted packets that were successfully received." ::= { apRFStatistics 27 } -- -- Access Point Serial Port Statistics Group (2.6) -- -- This group contains Serial Port interface statistics/counters -- information. -- apNbrOfDialouts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of dialout attempts by the AP." ::= { apSerialPortStatistics 1 } apDialoutFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of dialout failures by the AP." ::= { apSerialPortStatistics 2 } apNbrOfAnswers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of answer attempts by the AP." ::= { apSerialPortStatistics 3 } apCurrCallTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the length in seconds of current connection session. Note: the time is relative to the boot time of this AP." ::= { apSerialPortStatistics 4 } apLastCallTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the length in seconds of last connection session. Note: the time is relative to the boot time of this AP." ::= { apSerialPortStatistics 5 } -- -- WNMP Statistics Table Group (2.7) -- -- This group contains statistic/counter information for the WNMP -- interface to AP. -- apWNMPCfgPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of WNMP configuration requests received from NetVision." ::= { apWNMPStatistics 1 } wEchoRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of WNMP Echo Requests received by this AP." ::= { apWNMPStatistics 2 } wPingRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of WNMP ping requests received by this AP." ::= { apWNMPStatistics 3 } wPktsFromNVs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of WNMP packets that were received from NetVision via this AP." ::= { apWNMPStatistics 4 } wPPktsToNVs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of WNMP packets that were sent to the NetVision via this AP." ::= { apWNMPStatistics 5 } wPassThruEchoes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of WNMP packets for other stations that passed through this AP." ::= { apWNMPStatistics 6 } -- -- The Access Point MU Information Group (2.8) -- -- This group contains the Global Statistics/Counter information for -- All MUs which has/had been associated with this AP. -- apCurrentMUs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of MUs currently associated with this AP." ::= { apMUInfo 1 } apMaxMUs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the highest number of MUs ever associated with this AP." ::= { apMUInfo 2 } apTotalAssocs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total number of associations by all MUs with this AP." ::= { apMUInfo 3 } apMUTable OBJECT-TYPE SYNTAX SEQUENCE OF ApMUEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of information for a specific MU associated with this Access Point. The current number of entries is 127." ::= { apMUInfo 4 } apMUEntry OBJECT-TYPE SYNTAX ApMUEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of information for a specific MU associated with this Access Point. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { muIndex } ::= { apMUTable 1} ApMUEntry ::= SEQUENCE { muIndex INTEGER, muMacAddr PhysAddress, muInterface INTEGER, muState INTEGER, muPowerMode INTEGER, muStationID INTEGER, muLastAPAddr PhysAddress, muTotalAssoc INTEGER, muAssocStart TimeTicks, muLstAssStrt TimeTicks, muLastAssEnd TimeTicks, muNPktsSents Counter, muNPktsRcvds Counter, muNBytesSents Counter, muNBytesRcvds Counter, muNDiscdPkts Counter, muTmLastData TimeTicks, muPriority INTEGER, muSupportedRates INTEGER, muCurrentXmtRate INTEGER, muLastActivity TimeTicks, muEncryption INTEGER } muIndex OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-only STATUS mandatory DESCRIPTION "Specific MU information Table index. Range (1..127)." ::= { apMUEntry 1 } muMacAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the MU associated with this AP." ::= { apMUEntry 2 } muInterface OBJECT-TYPE SYNTAX INTEGER { ethernet(1), -- MU is located in Ethernet Interface. ppp(2), -- MU is located in PPP Interface. rf(3), -- MU is located in RF Interface. apstack(4) -- MU is located in AP internal stack -- interface. } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the interface on which this MU is located. Note: The AP may learn of an MU via the RF network or from the wired networks such as Ethernet or PPP. In this release, the AP does not keep track of those MUs reachable via the Ethernet, but that will change in future releases." ::= { apMUEntry 3 } muState OBJECT-TYPE SYNTAX INTEGER { associated(3), -- used for an associated MU not-associated(4) -- Not associated, roamed to -- another AP. } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the state of this MU." ::= { apMUEntry 4 } muPowerMode OBJECT-TYPE SYNTAX INTEGER { cam(1), -- continue active mode psp(2) -- power save mode } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the MU power mode (Power Save Protocol mode or Continue Active Mode.)" ::= { apMUEntry 5 } muStationID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the MU station ID." ::= { apMUEntry 6 } muLastAPAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the MAC address of the last AP with which this MU had an association." ::= { apMUEntry 7 } muTotalAssoc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the total associations for this MU." ::= { apMUEntry 8 } muAssocStart OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates when the MU began its current association with this AP. Note: Time is represented in seconds and the time is relative to the boot time of this AP. This is also true for all the association objects listed below." ::= { apMUEntry 9 } muLstAssStrt OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates when the MU began its prior association with this AP. If this is the first association with this AP, this value is zero. " ::= { apMUEntry 10 } muLastAssEnd OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates when the MU ended its previous association with this AP. If this is the first association with this AP, this value is zero. " ::= { apMUEntry 11 } muNPktsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of packets successfully transmitted to this MU." ::= { apMUEntry 12 } muNPktsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Good Packets received from this MU." ::= { apMUEntry 13 } muNBytesSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of bytes successfully transmitted to this MU." ::= { apMUEntry 14 } muNBytesRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Good Bytes received from this MU." ::= { apMUEntry 15 } muNDiscdPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of received packets discarded because no buffers." ::= { apMUEntry 16 } muTmLastData OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the time when the last good packet was received from this MU. The packet may be either an ACK, Data, or Poll. " ::= { apMUEntry 17 } muPriority OBJECT-TYPE SYNTAX INTEGER { voice(1), -- When this MU is operating as Phone normal(2) -- used for Normal (Non-Voice) operation } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the Voice/Data priority mode for this MU. " ::= { apMUEntry 18 } muSupportedRates OBJECT-TYPE SYNTAX INTEGER { one-Mb(1), two-Mb(2), one-and-two-Mb(3), five-half-Mb(4), one-and-five-half-Mb(5), two-and-five-half-Mb(6), one-and-two-and-five-half-Mb(7), eleven-Mb(8), one-and-eleven-Mb(9), two-and-eleven-Mb(10), one-and-two-and-eleven-Mb(11), five-half-and-eleven-Mb(12), one-and-five-half-and-eleven-Mb(13), two-and-five-half-and-eleven-Mb(14), one-and-two-and-five-half-and-eleven-Mb(15) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the supported data rates for this MU. The unit is MB/second. " ::= { apMUEntry 19 } muCurrentXmtRate OBJECT-TYPE SYNTAX INTEGER { one-Megabit(1), two-Megabit(2), five-half-Megabit(3), eleven-Megabit(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current transmit data rate for this MU. The unit is MB/second. " ::= { apMUEntry 20 } muLastActivity OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the time for the last activity for this MU." ::= { apMUEntry 21 } muEncryption OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of encryption for this mu. " ::= { apMUEntry 22 } apMUHmAgTable OBJECT-TYPE SYNTAX SEQUENCE OF ApMUHATEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of information on Mobile IP Home agent. The current number of entries is 127." ::= { apMUInfo 5 } apMUHATEntry OBJECT-TYPE SYNTAX ApMUHATEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of information on on Mobile IP Home agent. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { muHATMUIpAddr } ::= { apMUHmAgTable 1 } ApMUHATEntry ::= SEQUENCE { muHATMUIpAddr IpAddress, muHATFrAgIpAddr IpAddress } muHATMUIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This is the IP Address of the MU visiting in the foreign network." ::= { apMUHATEntry 1 } muHATFrAgIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This is the IP Address of the Foreign agent for the visiting MU." ::= { apMUHATEntry 2 } apMUFrAgTable OBJECT-TYPE SYNTAX SEQUENCE OF ApMUFATEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of information on Mobile IP Foreign agent. The current number of entries is 127." ::= { apMUInfo 6 } apMUFATEntry OBJECT-TYPE SYNTAX ApMUFATEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of information on Mobile IP Foreign agent. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { muFATMUIpAddr } ::= { apMUFrAgTable 1 } ApMUFATEntry ::= SEQUENCE { muFATMUIpAddr IpAddress, muFATHmAgIpAddr IpAddress } muFATMUIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This is the IP Address of the MU visiting in the foreign network." ::= { apMUFATEntry 1 } muFATHmAgIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This is the IP Address of the home agent for the visiting MU." ::= { apMUFATEntry 2 } -- -- Known APs Information Table Group (2.9) -- (Remote AP configuration) -- -- This group contains informations about the other Access Points known -- by this Access Point. -- apKnownAPsTable OBJECT-TYPE SYNTAX SEQUENCE OF ApKnownAPsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of information on other Access Points known by this Access Point. The current number of entries is 32." ::= { apPerformMgmt 9 } apKnownAPsEntry OBJECT-TYPE SYNTAX ApKnownAPsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of information on the Known Access Points. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { apAPMacAddr } ::= { apKnownAPsTable 1 } ApKnownAPsEntry ::= SEQUENCE { apAPMacAddr PhysAddress, apAPIpAddr IpAddress, apHoppingSet INTEGER, apHoppingSeq INTEGER, apNbrOfMUs INTEGER, apKBIOS INTEGER, apAway INTEGER, ap802dot11Protocol INTEGER, apFwVer DisplayString, apDSchannel INTEGER } apAPMacAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "Mac Address of this Known AP." ::= { apKnownAPsEntry 1 } apAPIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP Address of this Known AP." ::= { apKnownAPsEntry 2 } apHoppingSet OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Hopping Set of this Known AP." ::= { apKnownAPsEntry 3 } apHoppingSeq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Hopping Sequence of this Known AP." ::= { apKnownAPsEntry 4 } apNbrOfMUs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of MUs currently associated with this known AP." ::= { apKnownAPsEntry 5 } apKBIOS OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Kilobytes sent and received per second by this known AP on the radio interface." ::= { apKnownAPsEntry 6 } apAway OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate that whether this known AP is still alive or not. If the current AP does not receive WNMP packet from this known AP within 36 seconds, this known AP is considered 'AWAY'." ::= { apKnownAPsEntry 7 } ap802dot11Protocol OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicate that whether this known AP is 802.11 compliant." ::= { apKnownAPsEntry 8 } apFwVer OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates The firmware revision for this known Access Point." ::= { apKnownAPsEntry 9 } apDSchannel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in IEEE 802.11 specification section 15.4.6.2." ::= { apKnownAPsEntry 10 } -- -- Access Point Mobile Unit MAC Address Filtering and Packet Type -- Filtering Statistics Group (2.10) -- apAdrViolations OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Mobile Unit MAC address violations counted." ::= { apFilterStatistics 1 } apTypeViolations OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Ethernet packet type violations counted." ::= { apFilterStatistics 2 } -- -- Access Point Retry Histogram Table Group (2.12) -- -- This group contains the Access Point Retry statistics -- information based on the historical records used by -- this Access Point. -- apRetryHistogramTable OBJECT-TYPE SYNTAX SEQUENCE OF ApRetryHistogramEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Retry statistics, which is based on number of packets with various retries over time. The current number of entries is 16." ::= { apPerformMgmt 12 } apRetryHistogramEntry OBJECT-TYPE SYNTAX ApRetryHistogramEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of Retry Histogram, which is based on number of packets with various retries over time. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { apRetryHistogramIndex } ::= { apRetryHistogramTable 1 } ApRetryHistogramEntry ::= SEQUENCE { apRetryHistogramIndex INTEGER, apNumberOfRetries INTEGER, apPacketsHistogramCounts Counter } apRetryHistogramIndex OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS mandatory DESCRIPTION "Number of retries index. Range (1..16)." ::= { apRetryHistogramEntry 1 } apNumberOfRetries OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "Packets with this Number of retries. Range (0..15)." ::= { apRetryHistogramEntry 2 } apPacketsHistogramCounts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter for the packets per number of retries." ::= { apRetryHistogramEntry 3 } -- -- Access Point RF Per Frequency Statistics Table Group (2.13) -- for DSSS System -- This group contains the Access Point Radio Frequency Per -- Frequency statistics/counters information based on the -- historical frequency records used by this Access Point. -- apDSPerFreqStatTable OBJECT-TYPE SYNTAX SEQUENCE OF ApDSPerFreqStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Radio Per Frequency statistics, which is based on the historical frequency records used by this Access Point. The current number of entries is 78." ::= { apPerformMgmt 13 } apDSPerFreqStatEntry OBJECT-TYPE SYNTAX ApDSPerFreqStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of Radio per frequency statistics. A row in this table cannot be created or deleted by SNMP operations on columns of the table." INDEX { rfDSFrequency} ::= { apDSPerFreqStatTable 1 } ApDSPerFreqStatEntry ::= SEQUENCE { rfDSFrequency INTEGER, rfDSPerFqPktsSents Counter, rfDSPerFqPktsRcvds Counter, rfDSPerFqRetries Counter } rfDSFrequency OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Radio Frequency channel number." ::= { apDSPerFreqStatEntry 1 } rfDSPerFqPktsSents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter for the packets sent per frequency." ::= { apDSPerFreqStatEntry 2 } rfDSPerFqPktsRcvds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter for the packets received per frequency." ::= { apDSPerFreqStatEntry 3 } rfDSPerFqRetries OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter for the retries per frequency." ::= { apDSPerFreqStatEntry 4 } -- -- Access Point Mobile IP Statistic Group (2.14) -- for DSSS System -- This group contains the Access Point -- apAgentAdSent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter for the number agent advertisement sent." ::= { apMobileIPStatistics 1 } apRegRequestRcvd OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter for the number registration request received." ::= { apMobileIPStatistics 2 } apRegReplySent OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Counter for the number registration reply sent." ::= { apMobileIPStatistics 3 } -- -- Access Point Fault Management (3) -- apClrAllStatistics OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear all the interface statistics (yes = 1, no = 2)." ::= { apFaultMgmt 1 } apClrMUTable OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the MU Table (yes = 1, no = 2)." ::= { apFaultMgmt 2 } apClrACL OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the Access Control Table (yes = 1, no = 2)." ::= { apFaultMgmt 3 } apClrACLRangeTable OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the Access Control Range Table (yes = 1, no = 2)." ::= { apFaultMgmt 4 } apClrAddrFilterTbl OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear the Address Filtering Table (yes = 1, no = 2)." ::= { apFaultMgmt 5 } apLdACLFrMUList OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Load the Access Control Table from MU Table (yes = 1, no = 2)." ::= { apFaultMgmt 6 } apModemDialOut OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Commands the modem to dialout (yes = 1, no = 2)." ::= { apFaultMgmt 7 } apModemHangUp OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Forces the AP to issue a 'hangup' string to the modem attached to the serial port (yes = 1, no = 2). This command is meaning-ful only if the AP is configured for a modem connection on the serial port. If there is no modem or there is no connection, the command will be ignored." ::= { apFaultMgmt 8 } apUpdateFirmware OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Update the AP firmware through TFTP server. The AP firmware will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apDnLdFileName', and 'apTFTPServer' to the proper values." ::= { apFaultMgmt 9 } apDnLdFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..50)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the file to be downloaded to the AP. (Including path name and total up to 49 characters.) Note: IF DHCP is responded to, that name will take precedence and overwrite this name." ::= { apFaultMgmt 10 } apTFTPServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address for the TFTP Server. Note: IF DHCP is responded to, that IP address will take precedence and overwrite this setting." ::= { apFaultMgmt 11 } apResetAP OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Forces a reset of the AP (yes = 1, no = 2). Upon reset, the AP clears all the statistics and restores the last saved configuration information. If changes are made without being saved, the AP clears those changes upon reset." ::= { apFaultMgmt 12 } apHTMLFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..50)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the HTML file to be downloaded to the AP. (Including path name and total up to 49 characters.) Note: IF DHCP is responded to, that name will take precedence and overwrite this name." ::= { apFaultMgmt 13 } apUpdateHTMLFile OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Update the AP HTML file through TFTP server. The AP HTML file will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apHTMLFileName', and 'apTFTPServer' to the proper values." ::= { apFaultMgmt 14 } apDHCPEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enables/Disables DHCP mode for the AP. Default is disabled(2)." ::= { apFaultMgmt 15 } apUpdAllAPsFirmware OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Update all APs firmware on this network which share the same NetID through TFTP server. The AP firmware will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apDnLdFileName', and 'apTFTPServer' to the proper values." ::= { apFaultMgmt 16 } apUpdAllAPsHTMLFile OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Update all APs HTML file on this network which share the same NetID through TFTP server. The AP HTML file will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apHTMLFileName', and 'apTFTPServer' to the proper values." ::= { apFaultMgmt 17 } apTFTPUpdBothFiles OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Update Both HTML file and Firmware for this Access Point The AP HTML file will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apHTMLFileName', and 'apTFTPServer' to the proper values." ::= { apFaultMgmt 18 } apHelpURL OBJECT-TYPE SYNTAX DisplayString (SIZE (1..40)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the HTML Help file . (Including path name and total up to 39 characters.)" ::= { apFaultMgmt 19 } apFileUpdateStatus OBJECT-TYPE SYNTAX INTEGER { Download-successful(0), Too-many-XMODEM-errors(1), XMODEM-transfer-cancelled(2), XMODEM-packets-out-of-order(3), TFTP-server-unreachable(4), No-ARP-response-from-server(5), No-TFTP-service-on-server(6), Firmware-file-not-found(7), HTML-file-not-found(8), Bad-permissions-for-firmware-file(9), Couldn't-open-firmware-file(10), Couldn't-open-HTML-file(11), Error-during-TFTP-download(12), Too-many-TFTP-retries(13), Corrupted-firmware-file(14), General-download-failure(15) } ACCESS read-only STATUS mandatory DESCRIPTION "Reports the Firmware/HTML file download and update status." ::= { apFaultMgmt 20 } -- -- Access Point Security Management (4) -- apACLViolations OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the number of Access Control violations occurred." ::= { apSecurityMgmt 1 } apSaveConfig OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Saves the current configuration to NVRAM (yes = 1, no = 2)." ::= { apSecurityMgmt 2 } -- Access Point Access Control Table -- The Access Point Access Control Table is currently supported under -- the MAC addresses of the MUs only. No other control criteria is -- defined at this time. -- apAccCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF ApAccCtrlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of MAC addresses allowed to associate with the Access Point. The maximum number of entries in the table is 512." ::= { apSecurityMgmt 3 } apAccCtrlEntry OBJECT-TYPE SYNTAX ApAccCtrlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of MAC address Access Control. A row in this table is created by setting the value of allowedMU to the MAC address of the MU allowed to associate with this Access Point. A row in this table is deleted by setting the value of allowedMU to '000000000000'." INDEX { allowedIndex } ::= { apAccCtrlTable 1 } ApAccCtrlEntry ::= SEQUENCE { allowedIndex INTEGER, allowedMU PhysAddress } allowedIndex OBJECT-TYPE SYNTAX INTEGER (1..512) ACCESS read-only STATUS mandatory DESCRIPTION "Access Control Table index. Range (1..512)." ::= { apAccCtrlEntry 1 } allowedMU OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "MU MAC address which is allowed to associate with this AP." ::= { apAccCtrlEntry 2 } apACLRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF ApACLRangeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of Access Control Range, which consists of eight (8) pairs of low and high MAC addresses. Any Mobile Unit with the MAC address within the range is allowed to associate with the Access Point. The maximum number of entries in the table is 8." ::= { apSecurityMgmt 4 } apACLRangeEntry OBJECT-TYPE SYNTAX ApACLRangeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the table of MAC address Access Control Range. A row in this table is created by first setting the value of lowMacAddr to the lowest MAC address and then the value of highMacAddr to the highest MAC address of a group of Mobile Units allowed to associate with this Access Point. This sequence of setting is very important, otherwise a wrong result will occur. A row in this table is deleted by setting the value of either lowMacAddr or highMacAddr to '000000000000'." INDEX { apACLRangeIndex } ::= { apACLRangeTable 1 } ApACLRangeEntry ::= SEQUENCE { apACLRangeIndex INTEGER, lowMacAddr PhysAddress, highMacAddr PhysAddress } apACLRangeIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Access Control Range Table index. Range (1..8)." ::= { apACLRangeEntry 1 } lowMacAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The lowest Mobile Unit MAC address in the range which is allowed to be associated with this AP." ::= { apACLRangeEntry 2 } highMacAddr OBJECT-TYPE SYNTAX PhysAddress ACCESS read-write STATUS mandatory DESCRIPTION "The highest Mobile Unit MAC address in the range which is allowed to be associated with this AP." ::= { apACLRangeEntry 3 } apSaveConfigAllAPs OBJECT-TYPE SYNTAX INTEGER { yes (1), no (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Saves the current configuration to NVRAM for all APs on this network which share the same NetID(yes = 1, no = 2)." ::= { apSecurityMgmt 5 } END