|
You may reboot the AP-3 from the HTTP Interface. Rebooting saves configuration information to FLASH memory before the unit is restarted and is therefore preferable to resetting the hardware. Remember that the LAN interfaces are disconnected when the AP-3 reboots. To reboot from the HTTP Interface, click the Commands operation button, and then click the Reboot tab. Result: The Reboot screen appears, allowing you to enter the number of seconds until reboot. To reboot immediately, enter 0 (zero) seconds.
 |
To reset the AP-3 hardware, use a pencil or similar pointed object to
press and release the RESET button, located on the indicator side
of the unit.
|
|
