|
Once you have completed the initialization and configuration of your AP-3 device, verify proper operation by connecting to it using a wireless computer running the Client Manager diagnostics tool.
If you encounter problems...
- Cannot Associate with a Network. When the Client Manager starts, it automatically looks for a network. If it cannot associate with a network, you will see a message reminding you to update the case-sensitive Network Name in the current Client Manager Configuration Profile.
 |
Ask your network administrator for the correct Network Name, and
then edit the profile by opening Client Manager. Select Actions -
> Add/Edit Configuration Profile -> Edit Profile -> Basic. Enter the
Network Name and then click OK. For more information, please
refer to your PC Card documentation.
|
- If the Network Name is the same in both the client and the AP-3, then verify the settings in the Security Properties table, which includes encryption settings.
- Other Errors. Systematically double-check the AP-3 settings, especially the IP Addresses and the client IP Address Pool.
For more information, please refer to "Troubleshooting" in this guide.
|
