Go to table 2
e-mail || go back || Homepage
Attenuation || Power Handling || Contact Us
| LMR- 1700 | LMR- 1200 | LMR- 900 | LMR- 600 | LMR- 500 |
| Conductor: (note 1) | 0.527" | 0.349" | 0.262" | 0.176" | 0.142" |
| Dielectric: Cellular PE (note 2) | 1.350" | 0.920" | 0.680" | 0.455" | 0.370" |
| Shield: Aluminum Tape (note 3) | 1.356" | 0.926" | 0.686" | 0.461" | 0.376" |
| Tinned Copper Braid | 1.402" | 0.972" | 0.732" | 0.490" | 0.405" |
| Jacket: Black PE (note 4) | 1.670" | 1.200" | 0.870" | 0.590" | 0.500" |
| Blend Radius (note 5) | 13.5" | 6.5" | 3" | 1.5" | 1.25" |
| Weight (lbs/foot) | 0.736 | 0.448 | 0.266 | 0.131 | 0.097 |
| Temperature Range | -40°C to +85°C | ||||
| Impedance | 50 Ohms | ||||
| Velocity (%) | 89 | 88 | 87 | 87 | 86 |
| Capacitance (pF per Foot) | 22.8 | 23.1 | 23.4 | 23.4 | 23.6 |
| DC Resistance: center conductor | 0.21 | 0.32 | 0.54 | 0.53 | 0.82 |
| (ohms/1000') : shield | 0.27 | 0.37 | 0.55 | 1.20 | 1.27 |
| Shielding | > 90 db | ||||
| Phase Stability | +/- 10 ppm/degC | ||||
Notes:
| (1)
| Center Conductor in LMR-900, LMR-1200 & LMR-1700 is Copper Tube
|
| Center Conductor in LMR-400, LMR-500 & LMR-600 is Copper Clad Aluminum
|
| Center Conductor in LMR-100A through LMR-300 is solid Bare Copper
| (2)
| Low loss, closed cell polyethylene foam (LMR-100A is solid PE)
| (3)
| Aluminum Laminated Tape bonded to the Dielectric with a Tinned Copper Overbraid
| (4)
| Black, UV Protected Polyethylene
| (5)
| Less than 1 ohm impedance change at bend
| |